Standard: ASTM A192 / ASME SA 192

Description Name: SA 192 Seamless boiler tubes; A192 pipes; A192 carbon steel tube; ASTM A192 seamless tubing; ASTM A192 carbon steel pipe; SA192 SEAMLESS PIPE; ASTM A192 cold drawn seamless steel tubes; ASTM A192 pipes and tubing; carbon steel tube; Seamless steel tube; steel tube.

Size: 1⁄2 in. to 10 in. [12.7 to 254 mm]

Schedule: 1.5mm-30mm

Shape: Round

Production type: Hot rolled and cold cold drawn.

Length: Single random length/ Double random length or as customer’s actual request max length is 27m

Grade: A192 / SA192

Heat Treatment: Hot-finished tubes need not be heat treated. Cold- finished tubes shall be heat treated after the final cold-finishing at a temperature of 1200°F [650°C] or higher.

SA192 Tube Chemical Compositions

SA192 Tube Mechanical Tests Required

ASTM A192 / ASME SA192 Tube Wall Thickness Tolerance

SA192 Tube Outside Diameter Tolerance

SA192 Tube Cut Length Tolerance

SA192 Tube Hydrostatic Test Pressures

Each tube shall be subjected to the hydrostatic pressure test, or instead of this test, a nondestructive test may be used when specified by the purchaser.

SA192 Flattening Test

One flattening test shall be made on specimens from each end of two tubes selected from each lot or fraction thereof.

SA192 Flaring Test

One flaring test shall be made on specie- men from each end of two tubes selected from each lot or fraction thereof. These tubes shall be selected apart from those used for the flattening test.

Ordering Information

Orders for ASTM A192 / ASME SA192 should include the following, as required, to describe the desired material adequately:

l  Quantity (feet, meters, or number of lengths),

l  Name of material (seamless tubes),

l  Manufacture (hot-finished or cold-finished),

l  Size (outside diameter and minimum wall thickness),

l  Length (specific or random),

l  Optional requirements,

l  Test report required (see section on Certification of Specification A 450/A 450M),

l  Specification designation,

l  Special requirements.

Note:

l  Mill test certificates will be issued according to EN10204.3

l  The tubes Shall be Seamless, and the testing shall be as per A 450 / A450M.

Application:

Apply to the boiler and Superheater tubes for high-pressure service.

Packing:

1,Packed in wooden box or bundles protected with plastic paper, and suitably protected for sea-worthily delivery or as requested.

2,The Product marking shall include the ASTM A192 or ASME SA192, size, heat no., Lot No. and Manufacture name or logo.